T-Offshore

Hull must be over 27 inches, Hull may be Mono, Step or Cat. Drive, Direct, Geared, Flex Shaft or Straight Shaft
any Motor, Cells, 25 to 32 Sub C, 4 min. race on an offshore course. Hulls should be colored (trimmed) in the spirit of off-shore racing such as sponsor names and/or logos even if the names are fictitious.

T-Offshore Big Blue

This hull was built by a local craftsman in Burlington Ontario CANADA. It is 43 inches long X 12 inch beam. I have powered this hull with a Lehner 2280-11turn, turning a 51mm Graupner K-Series prop. It is running 32 GP3300 cells and the ESC is a Castle 110 HV. The Castle ESC is not water proof so I have constructed a waterproof box and added water cooled copper heat sinks. All up weight of 14.8lbs. 

 DSCN4669.JPG (993304 bytes) DSCN4672.JPG (1012400 bytes) DSCN4674.JPG (978649 bytes) DSCN4677.JPG (969171 bytes) DSCN4681.JPG (861461 bytes) DSCN4683.JPG (1139332 bytes) DSCN4684.JPG (1048433 bytes) DSCN4685.JPG (1047445 bytes) DSCN4686.JPG (1004161 bytes) DSCN4687.JPG (1017360 bytes) DSCN4688.JPG (970994 bytes) 

 

VIDEO    HOME